|
esp-sdr-zephyr
Raw I/Q receive and transmit on the ESP32-S3/C6 Wi-Fi radio, for Zephyr
|
Raw I/Q receive and transmit on the Wi-Fi radio (CONFIG_ESP_SDR). More...
Topics | |
| Radio | |
| Bring-up, tuning, front end turnaround and housekeeping (esp_sdr.h). | |
| Receive | |
| Gain, analog low-pass filter, burst and decimated capture (esp_sdr_rx.h). | |
| Transmit | |
| Power steps, one-shot and loop playback, sweeps and streaming (esp_sdr_tx.h). | |
| Continuous receive | |
| The gapless ring through three dump banks, ESP32-S3 (esp_sdr_ring.h). | |
| Diagnostic-bus ring | |
| Gapless 40 MS/s receive through the modem diagnostic bus and PARLIO, ESP32-C5 (esp_sdr_diag.h, CONFIG_ESP_SDR_DIAG). | |
| DAC-engine replay | |
| Waveform loops at 80 or 40 MS/s through the modem DAC engine, ESP32-C5 (esp_sdr_replay.h, CONFIG_ESP_SDR_REPLAY). | |
Raw I/Q receive and transmit on the Wi-Fi radio (CONFIG_ESP_SDR).
One user of the radio at a time; all calls may sleep. The ESP32-S3 has the whole library, the ESP32-C6 burst capture at 80 MS/s.